8 Best CO2 Monitors With Remote Sensors (November 2026)
The best CO2 monitors with remote sensors include the Temtop CO2 Monitor Indoor air Quality Monitor for room to room checking, the Autopilot CO2 Monitor & Controller w/15' Remote for grow rooms, and the U UNNI CO2 Monitor for Home CO2 Detector for wall mounting.
On this page (9 sections)
- The best CO2 monitors with a remote sensor or probe
- How these CO2 monitors and controllers compare
- How we compared these CO2 monitors
- Do you need a remote sensor or a portable meter?
- What does a remote CO2 sensor actually measure?
- Which CO2 monitor with remote sensor fits a grow tent?
- How do you read the numbers on a CO2 monitor?
- What should you check before buying a monitor with a probe?
- The verdict on the best CO2 monitor with remote sensor
The best CO2 monitor with remote sensor for most buyers is the Autopilot APC8200. Its 15 ft probe lets you read CO2 where the plants or people are while the display stays where you can see it.
That matters because CO2 is not the same across a room or a tent. Air near a canopy, a ceiling vent or an open door can read very differently from the air next to a wall-mounted display.
This guide covers the monitors and controllers that separate the sensor from the screen, and it explains when each setup wins. We compared the specs and features each brand publishes, then weighed them against how these units get used day to day.
For a plain room meter, our guide to the best CO2 monitor for home covers the plug-in and portable picks. If you want a meter to carry between rooms, a portable CO2 monitor may fit better than a fixed probe.
Our picks at a glance
-
1
Best for room to room checkingTemtop CO2 Monitor Indoor air Quality Monitor
9.7/10 our score
See it on Amazon -
2
Best for grow roomsAutopilot CO2 Monitor & Controller w/15' Remote
9.6/10 our score
See it on Amazon -
3
- 4
Check ityowexa CO2 Monitor with NDIR Sensor
Best for daily pattern spotting - 5
Best for long battery lifeCheck it - 6
Check itTEKCOPLUS CO2 Controller Carbon Dioxide Controller Air
Best for greenhouse automation - 7
Check itTEKCOPLUS CO2 Meter Portable CO2 Detector Digital
Best for wide measurement range - 8
Best for piggyback equipment controlCheck it
The best CO2 monitors with a remote sensor or probe
The Autopilot APC8200 is the strongest pick when the sensor has to sit away from the display, and the Temtop C1 is the best plain meter for moving between rooms. Choose by whether you need a probe or just a portable screen.
Temtop CO2 Monitor Indoor air Quality Monitor: Best for room to room checking
- NDIR sensor with ±40 ppm +5% accuracy
- 1 ppm resolution and 5-second refresh
- CO2, temperature and humidity
- 70 days standby
A small portable meter that covers CO2, temperature and humidity with a fast refresh. Its slim body and magnet mount make it easy to move between rooms.
Pros
- Fast 5-second refresh
- Accuracy stated for 400–2500 ppm
- Buzzer can be switched off
Cons
- No external probe for measuring away from the display
- Does not detect carbon monoxide
Temtop suits someone who checks CO2 in several rooms in one day and wants one display to carry along. It reads CO2, temperature and humidity from a Swiss-engineered NDIR sensor with stated accuracy of ±40 ppm +5% in the 400–2500 ppm band.
The 1 ppm resolution and 5-second refresh mean the number moves quickly rather than lagging behind you. It can stand, sit or attach with the bracket, and the buzzer and screen light can both be turned off for sleep.
Its 70 days of standby comes from two detection modes: an auto mode for quick real-time readings and an eco mode that stretches the battery. The slim body is about 5.5 in deep and under 5 oz, so it sits on a shelf without drawing attention.
The trade-off is that the sensor lives inside the display, so you cannot leave the screen in one spot and read air in another. The brand also notes it cannot detect carbon monoxide, so it is not a substitute for a CO alarm.
Buy it for carrying around the house, not for a fixed probe job in a tent or greenhouse.
Autopilot CO2 Monitor & Controller w/15' Remote: Best for grow rooms
- 15 ft remote probe with photocell
- Custom setpoint and deadband
- Trend chart by minute, hour, day and week
- 2-channel low drift NDIR sensor
A controller with a probe on a 15 ft cable so the display can sit outside the tent while readings come from the canopy. It also switches CO2 equipment against a setpoint.
Pros
- 15 ft probe reaches the canopy
- Adjustable setpoint and deadband
- Trend chart records up to a week
Cons
- Needs mains power
- Aimed at grow setups more than living rooms
Autopilot fits a grow room where the controller should sit outside the tent and the reading should come from inside it. The 15 ft remote probe with photocell places the sensor where the plants are, and the two-channel low drift NDIR sensor reads ppm from that spot.
You can set a CO2 setpoint and a ppm deadband, so the unit switches equipment only when the reading drifts far enough to matter. The trend chart records levels per minute, hour, day and week, and the zoom levels let you trace a spike.
Green LED status lights tell you at a glance whether the unit is calling for gas. The photocell on the probe means night-time enrichment can be held back when plants cannot use it.
A 3 year warranty covers the build, which is long for this class of controller.
The trade-off is power and fit: it runs on a cord and its controls are designed around grow-room equipment rather than a living room. It has no app, so the trend chart on the unit is your only history.
Buy it if you already run CO2 in a tent and want the reading to live in the canopy.
U UNNI CO2 Monitor for Home CO2 Detector: Best for wall mounting
- Swiss-made photoacoustic sensor
- CO2 history chart
- 3 alarm volumes and 3 backlight levels
- USB power with AAA backup
A home monitor that can sit on a table or hang on a wall, with a history chart that shows how CO2 rose and fell. The alarm has three volume steps.
Pros
- Wall mount or tabletop
- History chart on screen
- Adjustable alarm and backlight
Cons
- No remote probe
- Batteries not included
U UNNI suits a hallway, bedroom or office wall where a display should stay put and stay readable. It uses a Swiss-made photoacoustic sensor over a 400–5000 ppm range, with a history chart that shows how the level moved through the day.
Three alarm volumes and three backlight levels let you match the room, and the device runs from USB with an AAA battery backup. The screen also shows temperature and humidity, with a °C/°F switch and max and min records for the day.
Calibration is a manual routine done in 400 ppm air: hold the alert button, power on, wait for the CAL prompt, then let it run about three minutes until PASS appears. That matters if the unit has been moved a lot.
The battery backup also lets you calibrate outdoors without a cable.
It has no probe, so readings come from where the body hangs. Buy it for a wall in a room people share, and skip it if the sensor must sit away from the screen.
yowexa CO2 Monitor with NDIR Sensor: Best for daily pattern spotting
- 24-hour CO2 history bar graph
- 4-second measurement interval
- Emoticon CO2 indicator
- One-touch alarm mute
A color-screen monitor that charts a full day of CO2 and uses emoticons to show levels at a glance. Good for a nursery, bedroom or office desk.
Pros
- 24-hour history bar graph
- Kid-friendly emoticon display
- Alarm at 1000 ppm with mute
Cons
- History clears on restart
- Power-saving mode is not for everyday monitoring
yowexa suits a parent or desk worker who wants a quick read of the day's pattern without a phone app. The 24-hour CO2 history bar graph shows highs and lows at a glance, and the 4-second measurement interval with a 1-second LCD refresh keeps the current number live.
Emoticons link the CO2 level to a face, which helps children understand when a room needs air. An alarm sounds at 1000 ppm and mutes with one press.
After about three hours of running, the unit switches from instant logging to hourly records, so the day's trend stays clear.
The color screen has three backlight steps for day and night. Run it from USB for continuous use, since the backup battery is for emergencies and manual calibration, and a full charge takes at least 2.5 hours.
Restarting clears the history, so leave it powered. Buy it for a nursery or bedroom, as long as you want the display in the same room as the air you read.
Aranet4 CO2 Monitor: Best for long battery life
- E-ink display with up to 4 years of battery
- NDIR sensor
- Free app with 90 days of history
- CO2, temperature, humidity and pressure
A cable-free meter that runs on AA batteries for years and sends readings to a phone app. The e-ink screen stays readable without a cord.
Pros
- Up to 4 years on one set of batteries
- App stores 90 days of data
- No cables needed
Cons
- No external probe
- Small screen compared with color displays
Aranet4 suits a household that wants a meter to set down and forget about for months. Its e-ink display runs up to 4 years on two AA batteries, so there are no cords to route and no charging routine.
The NDIR sensor reads CO2, temperature, humidity and pressure, and a free phone app keeps up to 90 days of readings with graphs. Color coding and an optional buzzer flag high levels on the unit itself.
The e-ink screen is always readable in normal light and draws almost no power between updates, which is why the battery figure is so long. The unit is small at under 3 in square and 3.7 oz, so it moves from desk to shelf without fuss.
It is made in the European Union.
The trade-off is scope: it is a portable meter rather than a controller, so it will not switch a fan or a generator. It also has no probe, and the small screen shows less at once than a color display.
Buy it for long-term tracking in a home, and look at a controller if you need equipment to react.
TEKCOPLUS CO2 Controller Carbon Dioxide Controller Air: Best for greenhouse automation
- 4.5 m probe on a cable
- Day and night photo-sensor control
- Programmable CO2 chart
- Human and Plant modes
A controller built for plant rooms, with the probe kept in the canopy and the display out of the way. It can switch CO2 equipment during lights-on hours only.
Pros
- Long probe for canopy readings
- Day and night relay control
- Human and Plant modes
Cons
- Corded power only
- More settings to learn than a simple meter
TEKCOPLUS suits a greenhouse or grow room where enrichment should stop when the lights go out. Its 4.5 m probe cable keeps the display outside the growing space while the sensor sits in the canopy, and the built-in photo sensor pauses CO2 during darkness.
The NDIR sensor covers 0–5000 ppm with low drift, and the LCD charts levels across minute, hour, day and week scales. Human and Plant modes switch between indoor air safety and higher-output plant targets.
You can program separate target and zone values for each.
The body can be wall mounted, so the display stays clear of the plants. It runs on mains power, which suits a room with a permanent grow setup.
The trade-off is complexity: it is a controller with relays and zones, which is more than a home room needs. Nothing here is battery powered, so plan the cable run.
Buy it if you automate CO2 for plants, not if you only want a number on a wall.
TEKCOPLUS CO2 Meter Portable CO2 Detector Digital: Best for wide measurement range
- Range to 9999 ppm
- NDIR sensor
- CO2, temperature, humidity, dew point and wet bulb
- Audible and visual alarm
A handheld meter that reads far above normal room levels, which suits classrooms, factories and grow spaces. The LCD shows CO2, temperature and humidity together.
Pros
- Reads up to 9999 ppm
- Covers dew point and wet bulb
- Large backlit LCD
Cons
- No remote probe
- Accuracy bands widen above 2000 ppm
TEKCOPLUS's handheld meter suits a facilities check or a classroom survey where levels can run well above a home. It reads CO2 from 0 to 9999 ppm with an NDIR sensor, plus temperature, humidity, dew point and wet bulb on one backlit LCD.
The alarm triggers when the reading passes the threshold you set, which helps when you are walking a building and cannot watch the screen. Accuracy is stated as ±50 ppm or ±5% up to 2000 ppm, then ±10% above that.
Humidity is stated at ±3% RH.
The wide range makes it useful in factories, hospitals and hotels as well as classrooms. The large backlit screen shows all the readings at once, so one glance covers the room.
It runs on batteries and weighs under 5 oz.
It has no probe and runs on batteries, so it is a survey tool rather than a fixed station. Buy it for spot checks across several rooms, and pair it with a controller if you need the air to change on its own.
DANOPLUS CO2 Controller: Best for piggyback equipment control
- 15 ft external NDIR probe
- Human and Plant modes
- 10A piggyback socket
- LCD trend display with 5 time scales
A controller that plugs your CO2 generator or fan into its own socket and switches it against a target. The probe sits up to 15 ft away from the display.
Pros
- Probe reads away from the unit
- Piggyback socket avoids extra wiring
- Day and night relay saves gas
Cons
- Corded power only
- Best suited to a dedicated grow space
DANOPLUS suits a grower who wants one box to read and switch equipment without hiring an electrician. Its 15 ft external NDIR probe reads the canopy, and the 10A piggyback socket takes a CO2 generator or fan directly.
Plant mode starts enrichment when levels drop below target, while Human mode turns on ventilation when levels rise. Readings update every second, and the LCD trend display covers five time scales with max and min records.
The stated accuracy is ±50 ppm or ±5% across the full 0–5000 ppm range.
The built-in photocell pauses the generator at night, which the brand says saves up to 25% on gas. The optional buzzer alarms when the level passes your threshold.
Setup is a piggyback plug, so there is no extra relay box to buy.
The trade-off is that it is corded and made for a dedicated grow space, not a bedroom reading. Buy it for a grow room with equipment to switch, and compare its socket against the Autopilot's setpoint controls before you choose.
How these CO2 monitors and controllers compare
The probes and cable lengths do the most work in this group, because a sensor that reaches the right spot gives a better reading than a better sensor in the wrong place. Cable length, power type and whether the unit switches equipment separate the picks more than sensor brand.
The Autopilot and DANOPLUS both reach 15 ft and both switch equipment. The difference is the socket: DANOPLUS plugs a device straight into its 10A outlet, while Autopilot leans on setpoint and deadband controls.
TEKCOPLUS's controller reaches 4.5 m and adds human and plant targets.
The three meters without probes win on simplicity. Temtop and Aranet4 run on batteries and move between rooms; U UNNI and yowexa add history charts and alarms for a fixed spot.
TEKCOPLUS's handheld goes widest at 9999 ppm for survey work.
| Product | Best for | CO2 range | Sensor | Power | Our score |
|---|---|---|---|---|---|
| Temtop CO2 Monitor Indoor air Quality Monitor | room to room checking | 400–5000 ppm | NDIR | Battery or USB | 9.7 |
| Autopilot CO2 Monitor & Controller w/15' Remote | grow rooms | 2-channel NDIR | Corded electric | 9.6 | |
| U UNNI CO2 Monitor for Home CO2 Detector | wall mounting | 400–5000 ppm | Photoacoustic | USB or 3 x AAA | 9.4 |
| yowexa CO2 Monitor with NDIR Sensor | daily pattern spotting | NDIR | USB with battery backup | 9.2 | |
| Aranet4 CO2 Monitor | long battery life | NDIR | 8.8 | ||
| TEKCOPLUS CO2 Controller Carbon Dioxide Controller Air | greenhouse automation | 0–5000 ppm | Corded electric | 8.4 | |
| TEKCOPLUS CO2 Meter Portable CO2 Detector Digital | wide measurement range | 0–9999 ppm | NDIR | Battery | 8.2 |
| DANOPLUS CO2 Controller | piggyback equipment control | 0–5000 ppm | AC 100–240V | 8.1 |
How we compared these CO2 monitors
We compared published specs rather than running our own bench tests. Sensor type, range, stated accuracy, probe length and power source came first, because a monitor with a remote sensor lives or dies on where that sensor can go.
Then we looked at what each unit does with the reading. A monitor shows a number; a controller switches a generator or a fan against a setpoint.
That split decides which pick suits you.
We also weighed the display and alarm controls, since a monitor that lights up a bedroom at night gets unplugged. Adjustable backlight, mute buttons and history charts all earned credit for daily use.
Battery life counted for the portable meters and cord length for the controllers. Our scoring weighs specs, features and fit with what a buyer searching for a remote-sensor CO2 monitor needs.
Do you need a remote sensor or a portable meter?
You need a remote sensor when the air you care about sits away from where you can place a display, such as a plant canopy or a ceiling-height vent. A portable meter covers the same ground if you can carry the whole unit to the spot.
The remote probe wins in three cases: a tent where the display should stay dry, a greenhouse where the sensor must sit at plant height, and a wall display that must not hang inside the measured zone. A probe also keeps the display away from splashes and heat.
A portable meter wins when you want to check several rooms in an afternoon and do not need a fixed reading point. The Temtop C1 and Aranet4 both do this well, with quick refresh and long battery life.
Neither needs a cable run.
When a fixed display is the better call
If you want a number on a wall in a shared room and nothing else, a meter with a history chart does the job. U UNNI mounts on a wall or stands on a table, and yowexa charts a full day on its color screen.
When a controller earns its price
If you already run a CO2 generator or an extractor fan, a controller saves you a second device and a second cable. It reads and reacts, so the room corrects itself while you are away.
What does a remote CO2 sensor actually measure?
A remote sensor measures CO2 at the end of its cable, and the display shows that number. Most units here use NDIR sensing, which reads how much infrared light the CO2 in the air absorbs.
Our explainer on what an NDIR sensor is covers why that method holds up over time.
Two units here use a photoacoustic sensor instead: Temtop's C1 and the U UNNI. It works by measuring the sound a gas makes when light pulses through it.
Both approaches can give accurate readings; the difference is in the stated accuracy bands and how often the sensor needs calibration.
Cable length sets the limit. The Autopilot and DANOPLUS probes reach 15 ft, while the TEKCOPLUS controller probe runs 4.5 m, or about 14.7 ft.
Place the display within that reach of the air you want to read.
The probe's position matters more than the brand. Put it at canopy height in a tent, or at breathing height in a room, and keep it away from open windows, doors and the unit's own exhaust.
Sunlight on the probe can also skew a reading, so shade it.
Which CO2 monitor with remote sensor fits a grow tent?
A controller with a probe fits a grow tent best, because the display can stay outside the humid space while the sensor reads the canopy. The Autopilot APC8200 is the pick for most tents, with DANOPLUS close behind if you want a piggyback socket.
Tents need a reading at plant-top height, where CO2 is used. A probe clipped inside the canopy gives you that; a display hung on the tent wall reads the air by the zipper instead.
Cable ties and clips keep the probe steady without pinching the cable.
Enrichment only helps while the lights are on, so day and night control is worth having. Autopilot, TEKCOPLUS and DANOPLUS all handle that switch, and the two controllers with a photocell stop gas in darkness.
That saves both gas and the risk of over-filling a closed tent.
Probe placement inside a tent
Clip the probe just above the canopy and out of the direct path of a fan. Keep the display outside the tent door, or wall mount it nearby, so you read numbers without opening the space.
Cable routing and strain relief
Leave slack at both ends so the cable is not pulled when the door opens. Avoid running the cable through a zipper or a sharp edge, since a damaged signal lead is hard to repair.
How do you read the numbers on a CO2 monitor?
Read the numbers against two lines: about 400 ppm outdoors and around 1000 ppm as the usual indoor ceiling. Our guide to what a good CO2 reading is breaks down the bands and what each one means for a room.
A tent runs higher by design, often 1200 to 1500 ppm during lights-on, so set the controller target for the plants rather than for people. Keep the human and plant targets separate when the unit offers both modes.
Watch the resolution and refresh rate too. A 5-second refresh shows a person walking past; a 1-second update shows a door opening.
For safety alarms, faster is better.
Reading the trend, not just the number
A single reading tells you little about a room. The history views on U UNNI, yowexa, Autopilot, TEKCOPLUS and DANOPLUS show whether CO2 climbed all evening or spiked when the door opened.
A steady climb points to poor ventilation, while a spike points to a moment.
What the accuracy bands mean in practice
Stated accuracy like ±40 ppm +5% means the error grows with the reading. At 1000 ppm, ±5% is 50 ppm, so add the fixed figure and you know how close the number is likely to be.
Wide-range meters loosen the band above 2000 ppm, which matters if you survey factories or tents.
What should you check before buying a monitor with a probe?
Check three things first: probe reach, power source and whether the unit switches equipment. Reach decides if the sensor can get to the right spot, and power decides where the unit can live.
Cable length is the first check. Measure from the display spot to the canopy or vent, then compare it with the probe length.
Add a little slack so the cable is not pulled tight.
Next, decide if you need control. A monitor shows a number, while a controller switches a generator or fan.
If you already run CO2 equipment, the controller saves you a second device and a second set of cables. If not, a monitor is the simpler buy.
Finally, look at the display and alarm. A screen with adjustable backlight and a mute button stays useful overnight, while a fixed bright display tends to get covered up.
Check the refresh rate too, since slow updates hide spikes.
Sensors and calibration
Most NDIR units here self-calibrate in fresh air. The U UNNI and yowexa both allow a manual routine if a reading looks off.
Check whether the brand lists a calibration step before you buy, since it changes how much care the unit needs.
Power and placement
Corded controllers need a socket near the tent. Battery meters go anywhere but need a routine for charging or swapping cells.
A unit that stays plugged in reads continuously, while a battery unit may enter a power-saving mode between updates.
The verdict on the best CO2 monitor with remote sensor
Pick the Autopilot APC8200 if a probe has to reach into a canopy while the display stays clear, and the DANOPLUS if you want a piggyback socket and simpler wiring. Choose the Temtop C1 for the best plain meter to carry between rooms.
For a home room with no tent and no plants, the U UNNI or yowexa gives you a wall or desk reading with history and alarms, and the Aranet4 lasts years on one set of batteries. The TEKCOPLUS handheld is the one to grab when levels run high and you need a wide range.
Set the probe where the air matters, run the unit from mains power where it is offered, and read the number against the 1000 ppm mark for people. That covers most setups without a second device.
Our top 3 picks at a glance
-
1
Best for room to room checkingTemtop CO2 Monitor Indoor air Quality Monitor
9.7/10 our score
See it on Amazon -
2
Best for grow roomsAutopilot CO2 Monitor & Controller w/15' Remote
9.6/10 our score
See it on Amazon -
3
Frequently asked questions
Can I extend the probe cable on a CO2 controller?
Stick to the cable the unit ships with unless the manufacturer lists an extension. The probe carries a signal the controller is calibrated for, and a longer cable can change the reading.
Where should I place a remote CO2 probe in a room?
Put it at breathing height, away from open windows, doors and the monitor's own display. In a tent, clip it inside the canopy around plant-top height rather than at the floor.
Do remote sensors need calibration?
Many NDIR sensors self-calibrate in fresh air, and some controllers also allow a manual calibration. Follow the steps the brand lists for your model, and check the reading outdoors or in clean air first.
Is a controller the same as a CO2 monitor?
No. A monitor only shows the reading.
A controller also switches equipment, such as a CO2 generator or a ventilation fan, when the reading passes a setpoint, so it does two jobs.
About this guide: Our look at CO2 monitors with remote sensors draws on maker specs, materials and what owners report. See how we research.



